- LIMITORQUE LHS-HYDRAULIC SCOTCH-YOKE ACTUATOR
- ACRODYNE, ACROMATIC ACTUATORS AND SOLENOIDS and SPECIAL FB-BALL VALVES
- DN225, DN300, Limitorque MX, AcroGears Bevel boxes and Acrodyne Extensions
- Australian Built Limitorque MX, Extensions and AVK Australia Valves
- ACRODYNE’S PORTABLE VALVE ACTUATOR
- Pneumatic Actuator and Control Valve Solution
Case Study – Major Gate Installation
The fourth-largest water distributor-retailer in Australia, supplying drinking water, recycled water, and sewerage services to a population of more than 1.4 million in South East Queensland. This major Waste Water Treatment Plant is located near the Brisbane Airport and roughly 15kms from the CBD and supports the metropolitan area.
THIS TECHNICAL REFERENCE IS ACRODYNE’S INTERPRETATION OF THE PROJECT BUT IT HAS BEEN APPROVED BY THE END USER
Sector: Water and Waste Water
Category: Water Treatment
Products: Limitorque MX Electric Actuators and Acrogears Bevel Gearbox
The Treatment plant required the upgrade Slug Draw Off actuation and the actuation controlling the Rectangular Desludger Traveling Bridge. The criteria was for the equipment to be suitable to the continuous exposure to H2S and be capable of equipment reliability with precise communicating to the control system.
Acrodyne’s solution was the supply an Limitorque MX10 coupled to a ACROGEARS multi-turn gearbox for the Rectangular Desludger Traveling Bridge. For the Slug draw off valves Acrodyne provided direct mounted Limitorque MX10 and MX 20 actuators. The packages were optioned with a harsh environment marine grade coating. Base coat comprised off Durebuild high build epoxy coating and then finish with Weathermax 2 part Polyurethane coating. high performance coating that exhibits excellent gloss and colour retention during extended service periods in severe industrial and marine environments.
Predominantly a competitor’s site, apart from the products on offer it was Acrodyne’s commitment to service, support and a strong relationship with the engineering group at the plant that won Acrodyne right to supply and fit their product to the project. Since the installation Acrodyne has supplied another smaller solution within the plant.
The End User can enjoy the following benefits:
- Commitment to service and support.
- Absolute encoder
- No batteries
- Greater efficiency of the process
- Site commission support at start up
Products and services used
- Limitorque MX 10 and MX 20 electric actuator
- Acrogears bevel gearbox
- Paint booth facilities